Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Removing the display assembly involves using a halberd spudger or opening pick to separate the adhesive securing the display to the rear case.

Use the photos in this step to know the locations of the adhesive and where it is the thickest.

Refer to these images while following the guide to see where the adhesive is thickest and where to cut the deepest with your opening tool.

Ваш вклад лицензируется под свободной лицензией Creative Commons.