Skip to main content
Help
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In the next few steps, you will loosen the adhesive from underneath the battery, the logic board, and the frame under the battery. Do this slowly, carefully, and evenly. Take care not to puncture the battery or bend the logic board.

Use a plastic opening tool to pry up the adhesive around the three exposed edges of the battery.

Do not try to pry the battery out, just start loosening the adhesive.

Ваш вклад лицензируется под свободной лицензией Creative Commons.