Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In the following steps you'll be cutting through the adhesive that adheres the rear glass panel to the phone.

For reference, the backside of the panel is shown in the first photo. Note the clearance between the edge of the panel and the fragile ribbon cable beside the fingerprint sensor.

Be careful as you slice and pry to the left side of the fingerprint sensor, as seen from the outside of the phone in the third photo.

Inserting an opening tool more than 3 mm into the phone in this area can damage or tear the fingerprint sensor cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.