Skip to main content
Помощь

Power Mac G4 Quicksilver video adapter card replacement

  • Автор: Cameron Christensen
  • Времени уйдёт: 5 - 10 мин.
  • Сложность: Просто

This is hidden prereq.

Разделы
Инструменты

Шаг 1 Video Adapter  ¶ 

This is your Power Mac G4's video adapter.

Шаг 1 Video Adapter  ¶ 

  • This is your Power Mac G4's video adapter.

Шаг 2  ¶ 

Start by removing the screw holding the card to the chassis as shown.

Шаг 2  ¶ 

  • Start by removing the screw holding the card to the chassis as shown.

Шаг 3  ¶ 

Before lifting the card out, this small plastic tab needs to be pulled back there by releasing it entirely.

Шаг 3  ¶ 

  • Before lifting the card out, this small plastic tab needs to be pulled back there by releasing it entirely.

Шаг 4  ¶ 

With the tab and screw removed, lift the card straight out. When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.

Шаг 4  ¶ 

  • With the tab and screw removed, lift the card straight out.

  • When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.