Перейти к основному содержанию
Помощь

iBook G4 12" 1.33 GHz DC-In Board Replacement

  • Автор: Walter Galan
  • Сложность: Средняя

Tripped over your power cord? Hey, At least you don't have to replace the entire logic board.

Разделы
Файлы
Инструменты
Инструменты (продолжение)
Связанные запчасти

Шаг 1 DC-In Board  ¶ 

Remove the two Phillips screws securing the DC-In board, removing tape as necessary.

Шаг 1 DC-In Board  ¶ 

  • Remove the two Phillips screws securing the DC-In board, removing tape as necessary.

Шаг 2  ¶ 

Deroute the cable from around the optical drive, removing tape as necessary. Disconnect the DC-In cable from the logic board and angle the DC-In board out of its compartment.

Шаг 2  ¶ 

  • Deroute the cable from around the optical drive, removing tape as necessary.

  • Disconnect the DC-In cable from the logic board and angle the DC-In board out of its compartment.