Перейти к основному содержанию
  1. Peel up the lower EMI shield from the rear case.
    • Peel up the lower EMI shield from the rear case.

    • It is only necessary to peel the shield up from three sides. Leave it attached to the display.

    • If you happen to rip the EMI shield, use a piece of foil tape to cover the tear.

  2. Tape the EMI shield to the face of the display to keep it out of the way.
    • Tape the EMI shield to the face of the display to keep it out of the way.

Заключение

To reassemble your device, follow these instructions in reverse order.

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

За всё время: 1,655