Введение

Remove the access door to replace RAM chips.

Запчасти

Никакие детали не требуются.

  1. Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

    In order for the logic board to come out cleanly, one should remove the RAM at the end of this step.

    kevmacmills - Ответить

    Definitely! The author should make this as a step in the description (because not everyone reads Comments)

    finnik2d - Ответить

    Just did this procedure and the RAM must absolutely come out for the logic board to come free later.

    matt - Ответить

  2. Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
Заключение

To reassemble your device, follow these instructions in reverse order.

5 участников успешно повторили данное руководство.

Andrew Bookholt

503 123 Репутация

Автор 618 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 4

За 7 дней: 10

За 30 дней: 38

За всё время: 7,980