Введение

Use this guide to remove your access door.

Запчасти

Никакие детали не требуются.

Lay your iMac face-down on a soft, clean surface as shown. Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

Before beginning unplug your iMac.

Henry Barnett - Ответить

The screws are not phillips #1 as implied above. My phillips#2 bit fit.

John McWilliams - Ответить

Заключение

To reassemble your device, follow these instructions in reverse order.

5 участников успешно повторили данное руководство.

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 5

За 7 дней: 12

За 30 дней: 30

За всё время: 3,912