Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

Prereq for removing logic board, heat sink gone.

Запчасти

Детали не указаны.

  1. Remove the two 3.2 mm T5 screws securing the AirPort/Bluetooth card to the logic board.
    • Remove the two 3.2 mm T5 screws securing the AirPort/Bluetooth card to the logic board.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  3. Lift the end of the AirPort/Bluetooth card slightly, and pull it straight out of its socket on the logic board. Lift the end of the AirPort/Bluetooth card slightly, and pull it straight out of its socket on the logic board. Lift the end of the AirPort/Bluetooth card slightly, and pull it straight out of its socket on the logic board.
    • Lift the end of the AirPort/Bluetooth card slightly, and pull it straight out of its socket on the logic board.

Заключение

To reassemble your device, follow these instructions in reverse order.

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 6