Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Введение
Prereq for removing logic board, heat sink gone.
Выберете то, что вам нужно
-
-
Remove the two 3.2 mm T5 screws securing the AirPort/Bluetooth card to the logic board.
-
-
-
-
Lift the end of the AirPort/Bluetooth card slightly, and pull it straight out of its socket on the logic board.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.