Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Введение
Prereq to remove fan after hard drive brackets.
Выберете то, что вам нужно
-
-
Gently pull the fan cable connector straight away from its socket on the logic board.
-
-
-
-
Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.