Введение

Remove the glass panel to gain access to your iMac's internals.

Запчасти

Никакие детали не требуются.

    • The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

    • Stick two suction cups to opposing corners of the glass panel.

    • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

    • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent such as Windex.

  1. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  2. Gently pull the glass panel straight up off the iMac.
    • Gently pull the glass panel straight up off the iMac.

    • The glass panel has several positioning pins around its perimeter. To avoid shearing these pins off the glass panel, be sure to only pull straight up during removal.

    • Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.

Заключение

To reassemble your device, follow these instructions in reverse order.

25 участников успешно повторили данное руководство.

Brittany McCrigler

Участник с: 05.03.2012

80 693 Репутация

Автор 132 руководств

Команда

iFixit Member of iFixit

Community

109 членов

Автор 7 763 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 3

За 7 дней: 16

За 30 дней: 81

За всё время: 14,961