Перейти к основному содержанию

Введение

Internal guide for removing LCD before logic board.

Запчасти

No parts specified.

  1. Carefully lay the LCD next to the rear panel. Use a plastic opening tool to lift the display data cable lock upwards. Pull the display data cable out of its socket.
    • Carefully lay the LCD next to the rear panel.

    • Use a plastic opening tool to lift the display data cable lock upwards.

    • Pull the display data cable out of its socket.

    • Do not pull the connector upward as you disconnect it from its socket.

  2. Remove the LCD assembly from the rear panel assembly.
    • Remove the LCD assembly from the rear panel assembly.

Заключение

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Участник с: 17.10.2009

425 547 Репутация

Автор 411 руководств

Команда

iFixit Member of iFixit

Community

104 членов

Автор 9 229 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 140