Перейти к основному содержанию

Введение

This guide is a prereq only. Used to install transferred home button.

Запчасти

Детали не указаны.

  1. Carefully grasp the home button with a pair of tweezers. Gently lower and place the home button into the round opening located at the bottom of the front panel. The correct orientation of the home button is shown in the third picture. Make sure the back of the home button is face up and the flat portion of the inner home button circle is oriented to the top of the iPad.
    • Carefully grasp the home button with a pair of tweezers.

    • Gently lower and place the home button into the round opening located at the bottom of the front panel.

    • The correct orientation of the home button is shown in the third picture. Make sure the back of the home button is face up and the flat portion of the inner home button circle is oriented to the top of the iPad.

Заключение

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Участник с: 17.10.2009

479 736 Репутация

Автор 410 руководств

Команда

iFixit Участник iFixit

Community

139 членов

Автор 15 648 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 290