Перейти к основному содержанию

Введение

Prereq only.

Запчасти

No parts specified.

  1. Use a set of tweezers to remove any tape covering the front-facing camera cable clips. Use a set of tweezers to remove any tape covering the front-facing camera cable clips.
    • Use a set of tweezers to remove any tape covering the front-facing camera cable clips.

  2. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector.
    • Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector.

  3. Use a plastic opening tool to lift the front-facing camera cable connector straight up off of its socket on the logic board. Be sure to only pry on the connector, not the socket itself.
    • Use a plastic opening tool to lift the front-facing camera cable connector straight up off of its socket on the logic board.

    • Be sure to only pry on the connector, not the socket itself.

Заключение

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Участник с: 18.10.2012

384 995 Репутация

Автор 544 руководств

Команда

iFixit Member of iFixit

Community

104 членов

Автор 9 232 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 26