Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Введение
Prerequisite only. This guide shows how to disconnect the iPad Pro's display assembly.
Выберете то, что вам нужно
-
-
Remove the three 1.3 mm Phillips #000 screws securing the display cable bracket.
-
-
-
-
Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.