Перейти к основному содержанию

Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.

iPad Pro 9.7" Display Assembly Disconnect

Абсолютно необходимое руководство
Это руководство предназначено только для использования в качестве обязательного условия для других руководств. Оно не полностью само по себе.

Выберете то, что вам нужно

  1. iPad Pro 9.7" Display Assembly Disconnect, Remove the display bracket screws: шаг 1, изображение 1 из 1
    • Use a Phillips screwdriver to remove the three 1.3 mm Phillips screws securing the display cable bracket.

  2. iPad Pro 9.7" Display Assembly Disconnect, Remove the bracket: шаг 2, изображение 1 из 2 iPad Pro 9.7" Display Assembly Disconnect, Remove the bracket: шаг 2, изображение 2 из 2
    • Remove the display cable bracket.

  3. iPad Pro 9.7" Display Assembly Disconnect, Disconnect the display assembly: шаг 3, изображение 1 из 2 iPad Pro 9.7" Display Assembly Disconnect, Disconnect the display assembly: шаг 3, изображение 2 из 2
    • Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket.

  4. iPad Pro 9.7" Display Assembly Disconnect: шаг 4, изображение 1 из 2 iPad Pro 9.7" Display Assembly Disconnect: шаг 4, изображение 2 из 2
    • Repeat the previous step for the two remaining connectors.

  5. iPad Pro 9.7" Display Assembly Disconnect, Remove the display assembly: шаг 5, изображение 1 из 2 iPad Pro 9.7" Display Assembly Disconnect, Remove the display assembly: шаг 5, изображение 2 из 2
Заключение

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Участник с: 01/03/18

248 439 Репутация

Автор 503 руководств

Команда

iFixit Участник iFixit

Staff

136 членов

Автор 16 573 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 110