Введение

Just like in the iPhone 4, Apple has done their best to lock you out of your phone with two 5-point "Pentalobular" screws on either side of the dock connector.

This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws. Phillips drivers are much more readily available, and the screws are less likely to strip, making all of your future repairs and modifications much easier and more accessible.

Инструменты

No tools required.

Before we proceed, let's make sure you have the correct tools for the job.
  • Before we proceed, let's make sure you have the correct tools for the job.

  • iFixit's iPhone 4/4S Liberation Kit includes:

    • One 5-Point Pentalobe screwdriver

    • One #000 Phillips screwdriver

    • Two 3.6 mm "Liberation" Phillips screws

  • Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!

Добавить комментарий

Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
  • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

Добавить комментарий

  • Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.

  • Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).

Добавить комментарий

  • Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.

  • Huzzah! Your iPhone is now liberated from those pesky "Pentalobular" screws.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

202 участников успешно повторили данное руководство.

Andrew Optimus Goldberg

Участник с: 17.10.2009

384 593 Репутация

Автор 412 руководств

Команда

iFixit Member of iFixit

Community

108 членов

Автор 6 525 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 4

За 7 дней: 25

За 30 дней: 100

За всё время: 59,817