Введение
Prereq: disconnect the battery
Выберете то, что вам нужно
-
-
Remove the following Phillips #00 screws from the battery connector bracket:
-
One 2.2 mm screw
-
One 3.2 mm screw
-
-
-
-
Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
3 участников успешно повторили данное руководство.