Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

Prereq only, battery and logic board removed.

Запчасти

Детали не указаны.

  1. Grasp the antenna connector with a pair of tweezers and carefully begin de-routing it from its channel on the speaker. Grasp the antenna connector with a pair of tweezers and carefully begin de-routing it from its channel on the speaker.
    • Grasp the antenna connector with a pair of tweezers and carefully begin de-routing it from its channel on the speaker.

  2. To fully de-route the antenna connector, you may need to gently pull back the metal clip securing it to the speaker assembly.
    • To fully de-route the antenna connector, you may need to gently pull back the metal clip securing it to the speaker assembly.

  3. Remove the following screws securing the speaker to the rear case:
    • Remove the following screws securing the speaker to the rear case:

    • One 2.3 mm Phillips #00 screw

    • One 2.8 mm Phillips #00 screw

  4. Lift and remove the speaker out of the iPhone.
    • Lift and remove the speaker out of the iPhone.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 202