Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

Use this guide to remove or replace the two screws securing the iPhone XS display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

Запчасти

Детали не указаны.

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Заключение

To reassemble your device, follow these instructions in reverse order.

5 участников успешно повторили данное руководство.

Jeff Suovanen

Участник с: 06.08.2013

265 798 Репутация

Автор 232 руководств

Команда

iFixit Участник iFixit

Community

108 членов

Автор 9 949 руководств

Комментариев: 2

So you have not explained wether or not the iphone XS and the iphone X have identical pentalobe screws, what a guide it is, well infact i found out the hard way they are identical and replaceable with iphone x housing pentalobe screws, thanks.

Jonez K - Ответить

On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone

Casey Hunter - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 29

За последние 30 дней: 144

За всё время: 1,756