Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

The front caster wheel is the wheel that leads the Roomba over all of the dirt and debris so that the vacuum can pick it up. As a result, the caster wheel easily becomes dirty. The purpose of this guide is to show you how to take out the caster wheel so that it can be cleaned and restored to a satisfactory condition.

Запчасти

Детали не указаны.

  1. Flip the device over onto its back. Find the side brush, and unscrew the single screw that connects to brush motor  by using the Phillips head #2 screwdriver.
    • Flip the device over onto its back.

    • Find the side brush, and unscrew the single screw that connects to brush motor by using the Phillips head #2 screwdriver.

    • This screw doesn't completely come out of the yellow side brush.

  2. Using a Phillips #1 screwdriver, remove the four screws on the back panel. Once the screws are loose gently pry the back plate away from the body by using the spudger tool.
    • Using a Phillips #1 screwdriver, remove the four screws on the back panel.

    • Once the screws are loose gently pry the back plate away from the body by using the spudger tool.

    • The screws don't completely come out of the panel, but it will still come apart once unscrewed.

  3. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  4. Turn the Roomba upside down, so that the vacuum and wheels are facing the ceiling. Hold the caster wheel housing steady and insert the plastic spudger under the wheel housing. Apply some force to pry the caster wheel straight up out of the device, and remove the caster wheel housing from the Roomba.
    • Turn the Roomba upside down, so that the vacuum and wheels are facing the ceiling.

    • Hold the caster wheel housing steady and insert the plastic spudger under the wheel housing.

    • Apply some force to pry the caster wheel straight up out of the device, and remove the caster wheel housing from the Roomba.

  5. Firmly hold the caster wheel housing, and remove the caster wheel from its setting. Clean the caster wheel with soap and water.
    • Firmly hold the caster wheel housing, and remove the caster wheel from its setting.

    • Clean the caster wheel with soap and water.

    • Once the caster wheel is clean and thoroughly dried, repeat the process in reverse order to reinstall the caster wheel back to the Roomba.

Заключение

To reassemble the robot, follow these instructions in reverse order.

Rhett

Участник с: 22.01.2015

1 121 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 21-20, Maness Winter 2015 Участник Cal Poly, Team 21-20, Maness Winter 2015

CPSU-MANESS-W15S21G20

4 членов

Автор 14 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 20

За последние 30 дней: 72

За всё время: 2,262