Введение
The camera is attached to the motherboard in your phone. A T6 screwdriver is needed to access the camera.
Выберете то, что вам нужно
-
-
-
Using a T6 Torx Screwdriver, unscrew and remove the six screws shown in the picture.
-
-
-
Place the circuit board on a firm, static free surface (no cloth/carpet).
-
NOTE: The circled alignment notch points to the left.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
2 участников успешно повторили данное руководство.