iPhone 8 홈/Touch ID 센서 교체

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Английский

Корейский

Перевод шага 1

Шаг 1

Remove the home/Touch ID sensor bracket

Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
One 1.2 mm screw
Remove this screw first. Excess pressure may bend the home button bracket if you remove the 1.3mm screws first.
Three 1.3 mm screws
Remove the bracket.
During reassembly, be careful not to overtighten these screws, or your home button may not work.

홈/Touch ID 센서 브래킷 분리

홈/Touch ID 센서 위로 브래킷을 고정하는 Y000 나사 네 개를 풀어주세요:
1.2mm 나사 한 개
1.3mm 나사 세 개
브래킷을 분리하세요.
재조립 도중 나사를 너무 세게 조이지 마세요 홈 버튼이 작동하지 않을 수 있습니다.

	[title] Remove the home/Touch ID sensor bracket
	[* black] Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
	[* red] One 1.2 mm screw
+	[* icon_note] Remove this screw first. Excess pressure may bend the home button bracket if you remove the 1.3mm screws first.
	[* orange] Three 1.3 mm screws
	[* black] Remove the bracket.
	[* icon_reminder] During reassembly, be careful not to overtighten these screws, or your home button may not work.

Ваш вклад лицензируется под свободной лицензией Creative Commons .