Перейти к основному содержанию

Remplacement de l'écran complet de l'iPhone X

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 22 руководства, которые включают этот шаг.

Английский
Французский
Шаг 5
iPhone X Display Assembly Replacement: шаг 0, изображение 1 из 2 iPhone X Display Assembly Replacement: шаг 0, изображение 2 из 2
  • Use the point of a spudger or a fingernail to disconnect the OLED panel cable connector.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Servez-vous de la pointe d'une spatule ou d'un ongle pour déconnecter le connecteur de la nappe du panneau OLED.

Les connecteurs à pression comme celui-ci se reconnectent ainsi : alignez-les soigneusement et appuyez d'un côté puis de l'autre pour les enclencher. N'appuyez pas au milieu. Si un connecteur est mal aligné, les broches pourraient se déformer et causer des dommages irrévocables.

Ваш вклад лицензируется под свободной лицензией Creative Commons .