Перейти к основному содержанию

Procédure d'ouverture

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 23 руководства, которые включают этот шаг.

Английский
Французский

Перевод шага 13

Шаг 13
Opening Procedure: шаг 0, изображение 1 из 3 Opening Procedure: шаг 0, изображение 2 из 3 Opening Procedure: шаг 0, изображение 3 из 3
  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • As pictured, make sure the frame comes off with display and doesn't get stuck in the device.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

Ouvrez l'iPhone en tournant l'écran depuis le côté gauche, comme s'il s'agissait de la couverture au dos d'un livre.

N'essayez pas encore d'enlever complètement l'écran, car plusieurs nappes fragiles le relient toujours à la carte mère de l'iPhone.

Comme sur la photo, assurez-vous que le châssis se détache avec l'écran et ne reste pas coincé dans l'appareil.

Appuyez l'écran contre un objet pour le maintenir à la verticale pendant que vous travaillez sur le téléphone.

Lors du remontage, posez l'écran iPhone X à sa place, alignez les clips le long du bord supérieur. Puis appuyez délicatement sur le bord supérieur avant de refermer le reste de l'écran. S'il ne s'enclenche pas facilement, vérifiez l'état des clips sur le pourtour de l'écran et vérifiez qu'ils ne sont pas déformés.

Ваш вклад лицензируется под свободной лицензией Creative Commons .