Перейти к основному содержанию
Английский
Китайский
Шаг 10
The arm that attaches to the bottom of the window uses a pin with clip and special washer It's a bit fiddly since you can't see it easily, mostly you'll be working by feel, the clip slides into a groove machined into the tip of the pin There is a rectangular plastic bushing that slides in the window-bottom track, it fits over the pin first
Regulator arm to window bottom track
  • The arm that attaches to the bottom of the window uses a pin with clip and special washer

  • It's a bit fiddly since you can't see it easily, mostly you'll be working by feel, the clip slides into a groove machined into the tip of the pin

  • There is a rectangular plastic bushing that slides in the window-bottom track, it fits over the pin first

  • Then the pin and bushing go through the track

  • Then there is a plastic slightly-conical flat washer with a metal star-shaped washer that fits over that

  • Then at the very tip of the pin - facing into the door, there is a spring-steel clip

  • I used a pick and a flathead screwdriver and a pair of needlenose pliers and a bit of cursing to get it out and back in

  • NOTE: the window drops after you pull out the pin, since nothing is holding it up - I put a small prybar in place to hold it up, but you could also use a piece of wood or whatever

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.