Перейти к основному содержанию
Английский
Китайский
Шаг 11
There are four bolts (circled in blue) holding the regulator to the door, they are all 10mm head bolts, but the top two are longer I used a 10mm deep socket on a 1/4 inch ratchet, but any 10mm wrench, spanner, or socket should work in the second picture you can see the gear-quadrant of my old regulator hanging down, it's supposed to be up engaged in the winder gear teeth
Regulator to door bolts
  • There are four bolts (circled in blue) holding the regulator to the door, they are all 10mm head bolts, but the top two are longer

  • I used a 10mm deep socket on a 1/4 inch ratchet, but any 10mm wrench, spanner, or socket should work

  • in the second picture you can see the gear-quadrant of my old regulator hanging down, it's supposed to be up engaged in the winder gear teeth

  • It was at this point that I realised I could not get the old regulator past the window vertical track...

  • Notice I'm using a short prybar to prop up the window now (since otherwise it drops down) you could use a piece of wood or some other tool as well

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.