Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

Английский
Итальянский
Шаг 2
Remove the following two screws securing the top logic board bracket to the rear case:
  • Remove the following two screws securing the top logic board bracket to the rear case:

  • One 1.5 mm Phillips screw

  • One 2.3 mm Phillips screw

Rimuovi le seguenti due viti che fissano il supporto superiore della scheda logica al case posteriore.

Una vite Philips da 1,5 mm

Una vite Philips da 2,3 mm

Ваш вклад лицензируется под свободной лицензией Creative Commons.