Перейти к основному содержанию

Removing iPad 3 4G Front Panel

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 153 руководства, которые включают этот шаг.

Английский
Голландский
Шаг 18
Removing iPad 3 4G Front Panel: шаг 0, изображение 1 из 3 Removing iPad 3 4G Front Panel: шаг 0, изображение 2 из 3 Removing iPad 3 4G Front Panel: шаг 0, изображение 3 из 3
  • Slide the opening pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.

  • The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.

  • If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.

  • If the opening pick is getting stuck in the adhesive, "roll" the pick as shown in step 9.

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons .