Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Английский
Немецкий
Шаг 11
Lay the lower case assembly down flat, and apply adhesive remover to the two middle battery cells—at each side, and along the front edge (opposite the logic board area). Lay the lower case assembly down flat, and apply adhesive remover to the two middle battery cells—at each side, and along the front edge (opposite the logic board area). Lay the lower case assembly down flat, and apply adhesive remover to the two middle battery cells—at each side, and along the front edge (opposite the logic board area).
  • Lay the lower case assembly down flat, and apply adhesive remover to the two middle battery cells—at each side, and along the front edge (opposite the logic board area).

Lege die untere Gehäuseeinheit flach vor dich hin und wende den Klebstoffentferner an den mittleren beiden Zellen an, an jeder Seite und an der Vorderkante. (gegenüber der Stelle, wo das Logic Board ist)

Ваш вклад лицензируется под свободной лицензией Creative Commons.