Почините Свои Вещи Сообщество Магазин

iPhone 8 Plus 电池更换指南

Примечание: Вы редактируете необходимое руководство. Любые внесенные вами изменения повлияют на руководство, которое включает эту стадию.

Назад к руководству
Английский
Китайский
Шаг 3
iPhone 8 Plus Battery Replacement: шаг 0, изображение 1 из 3 iPhone 8 Plus Battery Replacement: шаг 0, изображение 2 из 3 iPhone 8 Plus Battery Replacement: шаг 0, изображение 3 из 3

  • Try to keep the adhesive strips flat and unwrinkled during this procedure; twisted or wrinkled strips will stick together and break instead of pulling out cleanly.

  • Additionally, do not press down on the battery as you pull the strips. Pressing on the battery creates pressure points that can snag and break the adhesive.

  • Slowly pull one battery adhesive tab away from the battery, towards the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at as low an angle as possible, without snagging it on any of the iPhone's other components.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

  • If the battery adhesive tabs break during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.

  • If any of the adhesive strips break underneath the battery and cannot be retrieved, try to remove the remaining strips, and then proceed as instructed below.

在此过程中，尽量保持胶条平整和不起皱；扭曲或起皱的胶条会粘在一起并断裂，而不是干净地拉出。

此外，在拉动条状物时，不要压住电池。压在电池上会产生压力点，可能会卡住并破坏粘合剂。

慢慢地 将一个电池粘性标签从电池上拉开，向iPhone的底部移动。

稳定地拉动，保持对条状物的持续拉动，直到它从电池和后壳之间滑出。为了达到最佳效果，在不妨碍iPhone其他部件的情况下，以尽可能低的角度拉动条状物，不要让它卡住。

该条带将伸展到其原来长度的许多倍。继续拉动，如有必要，在电池附近重新抓取带子。

如果在拆除过程中电池胶片断裂，请用手指或钝镊子取回剩余的胶片长度，然后继续拉动。

如果有任何胶条在电池下方断裂，无法取回，请尝试取下剩余的胶条，然后按照下面的指示操作。

Ваш вклад лицензируется под свободной лицензией Creative Commons .