Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Английский
Немецкий

Translating step 1

Шаг 1
If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.
  • If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board.

  • Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.

Falls notwendig, löse das Stück Tape, dass das Digitizer FIachbandkabel am Logic Board befestigt.

Klappe die Haltelasche an beidne ZIF Steckern des Digitizer Flachbandkabels um.

Ваш вклад лицензируется под свободной лицензией Creative Commons.