Перейти к основному содержанию

iPhone 8 Plus Lightning Connector Einheit austauschen

Английский
Немецкий
Шаг 10
iPhone 8 Plus Lightning Connector Assembly Replacement: шаг 0, изображение 1 из 3 iPhone 8 Plus Lightning Connector Assembly Replacement: шаг 0, изображение 2 из 3 iPhone 8 Plus Lightning Connector Assembly Replacement: шаг 0, изображение 3 из 3
  • Remove the three Phillips screws securing the lower speaker:

  • Two 1.4 mm screws

  • One 2.4 mm screw

  • During reassembly, press the speaker toward the bottom edge of the iPhone until the screw holes align, and hold it there while you install the screws.

Entferne die drei Kreuzschlitzschrauben, welche den unteren Lautsprecher befestigen:

Zwei 1,4 mm Schrauben

Eine 2,4 mm Schraube

Drücke beim Zusammenbau den Lautsprecher zur Unterkante des iPhones, bis die Schraubenlöcher passen. Halte ihn so fest und drehe die Schrauben hinein.

Ваш вклад лицензируется под свободной лицензией Creative Commons .