Skip to main content
Английский
Испанский
Step 17
While supporting the motherboard at an angle, use the point of a spudger to pry out and disconnect the flex cable connector underneath the motherboard. To reattach the connector, support the motherboard at a slight angle and line up the connector. Press the connector against the socket gently with your finger until it seats fully.
  • While supporting the motherboard at an angle, use the point of a spudger to pry out and disconnect the flex cable connector underneath the motherboard.

  • To reattach the connector, support the motherboard at a slight angle and line up the connector. Press the connector against the socket gently with your finger until it seats fully.

Mientras sostienes la placa madre a un ángulo, usa la punta de un spudger para hacer palanca y desconectar el conector de cable flexible por debajo de la placa madre.

Para volver a conectar el conector, sostiene la placa madre a un leve ángulo y alinéalo con el conector. Presiona el conector contra el zócalo ligeramente con tu dedo hasta que se encaje completamente.

Ваш вклад лицензируется под свободной лицензией Creative Commons.