Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 3 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 7
Carefully disconnect the three antenna coax cables by prying them straight up from the logic board. Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it. To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.
  • Carefully disconnect the three antenna coax cables by prying them straight up from the logic board.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

Disconnetti con cautela i due cavi coassiali di antenna alzandoli in verticale dalla scheda logica.

Fai scorrere le pinzette o lo spudger sotto ciascun cavo finché non arrivi vicino allo zoccolo e a quel punto torci l'attrezzo o fai leva per scollegare il connettore.

Per riconnettere ciascun cavo, allinea il connettore sopra il suo zoccolo e quindi premilo verso il basso finché non scatta in posizione.

Ваш вклад лицензируется под свободной лицензией Creative Commons.