Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 7 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

用吸盘轻轻将屏幕提起,拉出一道细缝。注意此时力度要均匀。

把一个翘片插入到细缝中

这些防水胶带将屏幕固定的很牢固。你要用很大的力气才能将屏幕提起一条缝。如果你打开屏幕有困难的话,继续加热并轻轻上下摇动屏幕来软化粘合剂直到你能插入翘片为止。

Ваш вклад лицензируется под свободной лицензией Creative Commons.