Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 7 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 3
Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board. Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
  • Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

使用撬棒或乾淨的指甲從電路板上的插座上撬起電池連接器。

盡量不要損壞圍繞此板和其他板連接的黑色矽膠密封。 這些密封件提供額外的防水和防塵侵入保護。

將連接器稍微遠離邏輯板,以防止它在維修期間意外接觸插座並為手機供電。

Ваш вклад лицензируется под свободной лицензией Creative Commons.