Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Английский
Китайский
Шаг 8
Pull the logic board assembly out of the outer case, minding the hold switch and click wheel cables that may get caught.
  • Pull the logic board assembly out of the outer case, minding the hold switch and click wheel cables that may get caught.

  • When reassembling, ensure the click wheel cable is toward the front of the Nano and not in the grooves on the side. If it is in the groove you will probably cut it while sliding the logic board into place.

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.