Перейти к основному содержанию
Английский
Испанский
Шаг 5
The device is pretty simple so far, but has no shortage of screws. There's no adhesive holding the U together, but were it not for our Magnetic Project Mat, all of these screws could get out of hand. So far we have encountered both Phillips and Tri-wing screws, nothing our 64 Bit Driver Kit can't handle. After some unscrewing, the front panel pops right off.
  • The device is pretty simple so far, but has no shortage of screws. There's no adhesive holding the U together, but were it not for our Magnetic Project Mat, all of these screws could get out of hand. So far we have encountered both Phillips and Tri-wing screws, nothing our 64 Bit Driver Kit can't handle.

  • After some unscrewing, the front panel pops right off.

El dispositivo es bastante sencillo, pero no va escaso de tornillos. No hay parte adhesiva sujetando la unidad, y si no fuera por nuestra Pizarra Magnética, todos estos tornillos podrían desparramarse. Hemos encontrado tanto tornillos Philips como de 3 puntas, nada que nuestro destornillador de precisión no pueda manejar.

Después de aflojar algunos tornillos, la parte frontal se extrae con suavidad.

Ваш вклад лицензируется под свободной лицензией Creative Commons.