Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Английский
Немецкий
Шаг 26
The end of the mid-battery circuit board closer to the Smart Connector is held down with adhesive. Slide an opening pick underneath the mid-battery circuit board, near the Smart Connector. Carefully slice underneath the board around the post to release the board from the rear case.
  • The end of the mid-battery circuit board closer to the Smart Connector is held down with adhesive.

  • Slide an opening pick underneath the mid-battery circuit board, near the Smart Connector.

  • Carefully slice underneath the board around the post to release the board from the rear case.

Die Platine in der Mitte des Akkus in der Nähe des Smart Connectors ist am Rand unten verklebt.

Schiebe ein Plektrum in der Nähe des Smart Connectors unter diese Platine.

Schneide vorsichtig unter der Platine um den Pfosten herum, so dass sie sich vom Rückgehäuse löst.

Ваш вклад лицензируется под свободной лицензией Creative Commons.