Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

Английский
Испанский
Шаг 4
While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Mientras sostiene el vaso con la ventosa, deslice la punta de una púa de apertura en el espacio entre el vidrio y el cuerpo del iPad.

No inserte el pico de apertura más profundo que el bisel negro en el costado de la pantalla. Insertar demasiado el pick puede dañar el LCD.

Tire de la protuberancia de plástico de la ventosa para liberar el sello de vacío y retire la ventosa del conjunto de la pantalla.

Ваш вклад лицензируется под свободной лицензией Creative Commons.