Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

Английский
Китайский
Шаг 4
While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

拉住吸盘,在玻璃和机壳之间的缝隙处放置一个撬片。

切勿将撬片插入深度超过黑色边框,这样深入过度可能会使LCD屏幕受损。

然后拉动吸盘塑料部分来将吸盘从显示模组上取下。

Ваш вклад лицензируется под свободной лицензией Creative Commons.