Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 35 руководства, которые включают этот шаг.

Английский
Итальянский

Перевод шага 1

Шаг 1
Be very careful to pry evenly on the digitizer connector, and not on the socket at all. The socket and connector are very delicate and if you damage either, your digitizer won't work. To minimize stress on the socket, try prying under the short edge of the connector, rather than the long edge which is shown in these images.
  • Be very careful to pry evenly on the digitizer connector, and not on the socket at all. The socket and connector are very delicate and if you damage either, your digitizer won't work.

  • To minimize stress on the socket, try prying under the short edge of the connector, rather than the long edge which is shown in these images.

  • Gently pry the digitizer connector up from its socket on the logic board.

Stai molto attento a fare leva equamente sul connettore del digitizer, ma non sulla sua presa. La presa e il connettore sono molto delicati e se ne danneggi uno dei due il digitizer non funzionerà più.

Per ridurre la forza sulla presa, prova a fare leva sotto i lati corti del connettore piuttosto che sotto quelli lunghi, come mostrato nelle immagini.

Fai leva delicatamente sul connettore del digitizer per sollevarlo dalla sua presa sulla scheda madre.

Ваш вклад лицензируется под свободной лицензией Creative Commons.