Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Английский
Немецкий
Шаг 4
Slide the opening pick along the edge of the phone, slicing through the adhesive. Do not attempt to slice the adhesive holding the corners down before applying heat. If you do, you may crack the back cover. Leave a pick in the seam to prevent the adhesive from re-sealing.
  • Slide the opening pick along the edge of the phone, slicing through the adhesive.

  • Do not attempt to slice the adhesive holding the corners down before applying heat. If you do, you may crack the back cover.

  • Leave a pick in the seam to prevent the adhesive from re-sealing.

Schiebe das Plektrum an der Kante des Smartphones entlang und durchtrenne den Kleber.

Versuche auf keinen Fall, den Kleber in den Ecken zu durchtrennen, bevor du sie erwärmt hast. Sonst riskierst du es, die Rückabdeckung zu brechen.

Lasse ein Plektrum in der Fuge stecken, damit sich der Kleber nicht wieder verbindet.

Ваш вклад лицензируется под свободной лицензией Creative Commons.