Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 4 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 3
Locate the two 5.08mm T5 Torx screws. The two screws will be located on the left and right sides in the kickstand. Make sure when removing the screws to be careful to prevent stripping of the head.
  • Locate the two 5.08mm T5 Torx screws. The two screws will be located on the left and right sides in the kickstand.

  • Make sure when removing the screws to be careful to prevent stripping of the head.

  • With all the screws removed gently wiggle the stand side to side until the lever in the middle is free, releasing the stand.

Svita le due viti Torx T5 da 5,08 mm. Le due viti sono posizionate all'estremità destra e sinistra della cerniera del cavalletto.

Assicurati di non spanare la testa delle viti mentre le sviti.

Dopo aver rimosso tutte le viti fai ondeggiare delicatamente il cavalletto finché la leva nel centro viene liberata, rilasciando il cavalletto.

Ваш вклад лицензируется под свободной лицензией Creative Commons.