Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 9 руководства, которые включают этот шаг.

Английский
Французский
Шаг 3
Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case: One black 6.8 mm screw
  • Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case:

  • One black 6.8 mm screw

  • One silver 6.3 mm screw

  • One black 4.9 mm screw

  • The silver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

Dévissez les vis suivantes, fixant le haut-parleur droit au boîtier supérieur :

Une vis Torx T5 de 6,8 mm

Deux vis Torx T5 de 6,3 mm

Il est possible que la vis dans le coin soit recouverte d'un peu d'éponge métallique. Retirez-la à l'aide d'une pincette ou de la pointe de votre spatule.

-[* black] Remove the following screws securing the right speaker to the upper case:
- [* red] One 6.8 mm T5 Torx screw
- [* orange] Two 6.3 mm T5 Torx screws
-[* icon_note] The corner screw may be covered with some metallic sponge that should be removed with tweezers or the corner of your spudger.
+[* black] Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case:
+ [* red] One black 6.8 mm screw
+ [* orange] One silver 6.3 mm screw
+ [* yellow] One black 4.9 mm screw
+[* icon_note] The silver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

Ваш вклад лицензируется под свободной лицензией Creative Commons.