Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Английский
Китайский
Step 2
Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner. Unscrew the 0.266 inch screw using the T6 Torx screwdriver.
  • Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.

  • Unscrew the 0.266 inch screw using the T6 Torx screwdriver.

  • If there is a red Palm sticker covering this screw, puncture it to access the screw.

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.