Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 27 руководства, которые включают этот шаг.

Английский
Французский

Перевод шага 1

Шаг 1
Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.
Remove the screws securing the lower case
  • Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.

  • If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.

  • Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.

  • Use a P5 driver to remove the following screws:

  • Two 7.9 mm screws

  • Two 7.1 mm screws

  • Six 2.6 mm screws

Avant de vous lancer, vous devez désactiver le démarrage automatique de votre Mac. Cette fonction fait démarrer votre Mac quand on ouvre l'écran et vous risquez de l'activer accidentellement lors du démontage. Consultez ce tutoriel pour la désactiver.

Éteignez complètement et débranchez votre MacBook Air avant de commencer. Fermez l'écran et retournez l'ordinateur.

Avec un tournevis P5, dévissez les vis suivantes :

Deux vis de 7,9 mm

Deux vis de 7,1 mm

Six vis de 2,6 mm

[title] Remove the screws securing the lower case
[* icon_note] Before starting this procedure, you mustshould disable your Mac's '''Auto Boot''' feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] or follow the abbreviated instructions below to disable Auto Boot.
[* black] If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.
[* icon_note] Before starting this procedure, you mustshould disable your Mac's '''Auto Boot''' feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] or follow the abbreviated instructions below to disable Auto Boot.
[* black] If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.
[* icon_caution] Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.
[* black] Use a P5 driver to remove the following screws:
[* red] Two 7.9 mm screws
[* orange] Two 7.1 mm screws
[* yellow] Six 2.6 mm screws

Ваш вклад лицензируется под свободной лицензией Creative Commons.