Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 5 руководства, которые включают этот шаг.

Английский
Китайский
Шаг 4
Repeat the previous two steps to remove the three adhesive strips on the other side of the battery. If any of the adhesive strips broke, you can use high-concentration (>90%) isopropyl alcohol to help remove them: Carefully drip isopropyl alcohol along either edge of the battery, in the recessed part of the upper case, where the adhesive pull tabs were.
  • Repeat the previous two steps to remove the three adhesive strips on the other side of the battery.

  • If any of the adhesive strips broke, you can use high-concentration (>90%) isopropyl alcohol to help remove them:

  • Carefully drip isopropyl alcohol along either edge of the battery, in the recessed part of the upper case, where the adhesive pull tabs were.

  • Applying too much alcohol or applying it outside of the wells in the case where the adhesive sits risks damaging other components.

  • Let the alcohol soak into the adhesive for a minute or two.

  • Use opening picks to gently pry the battery away from the upper case.

重复前面的两个步骤,以除去电池另一侧的三个胶带。

如果有任何胶带破裂,则可以使用高浓度(> 90%)的异丙醇帮助将其除去:

将异丙醇沿着电池的任一边缘小心地滴在上壳体的凹入部分中,在该凹进部分处有粘性拉环。

如果粘合剂所在的位置,使用过多的酒精或将其涂在孔的外部可能会损坏其他组件。

让酒精浸入粘合剂一两分钟。

使用三角撬片轻轻地将电池撬离上壳。

Ваш вклад лицензируется под свободной лицензией Creative Commons.